Custom Cabana Covers

Tarps used to cut down on the wind
Black mesh wind tarps used as curtains on a backyard cabana in Red Deer, Alberta. The curtains cut the wind down to a light breeze while adding privacy and shade.

A cabana is the roofed, open-sided structure that shades a patio or pool deck. It normally has four posts, a flat or shallow-sloped roof, and curtains you can draw closed or tie back. A custom cabana cover is the fabric that makes it usable: a made-to-order top cover, side curtains, or both, sized to your frame and built in Ontario, Canada.

If your structure has an open beam roof, you want a pergola cover. If it is a garden structure with a peaked roof, see our gazebo covers. If it is poolside, with a solid roof and curtained sides, a cabana cover is the right fit.

Top cover or side curtains — or both

The top cover keeps rain off the seating area underneath. Use 18 oz solid vinyl when keeping rain off the covered area is the main goal. An angled installation helps water drain instead of pooling.

The side curtains are what turn a cabana from a shade structure into a room. They cut the wind, add privacy and shade, and keep mosquitoes out. The curtains can be rolled up or tied back when you want the breeze. A pocket on the lower edge lets the curtains roll up and clip out of the way, grommets along the top make them easy to hang on hooks, and marine snaps on the sides keep them tight against the frame.

Choosing the material

It is not necessary to use the same material on all four sides. Here are the materials to consider, depending on why you want to cover your cabana.

  1. If you mainly want to keep out mosquitoes while allowing maximum breeze, our 60% mesh product would be a good choice.
  2. In addition to mosquitoes, if you also want to block some of the wind and provide some shade, our 90% Block Premium Mesh would work well. This vinyl coated mesh is UV protected and is much more durable than typical screening.
  3. If you want to keep out both the wind and the rain you pretty well need to go with a vinyl product. 18 oz solid vinyl would block visibility and offer the maximum privacy, and is available in a range of colours.
  4. If you want complete visibility as well as waterproof protection, our 20 mil clear vinyl will let in lots of light while blocking the wind and the rain.

Measuring your cabana

We need the width and length of the roof, the spacing of the posts, and the curtain drop (the distance from the top cable or rail to the ground on each side). Add a couple of extra inches to the width of each side: even vinyl products will expand and shrink to a certain extent based on the temperature. Avoid having the curtains go right to the ground since the bottom edge of the tarp will wear over time if it is constantly being dragged or blown over your patio surface. If grommets must align with posts or beams, provide a diagram showing every required grommet position.

Hanging the curtains

One of our customers hung mesh wind tarps on his backyard cabana with aircraft cable around the top, attached with small clips through the grommets, and a rope around the bottom on the sides he wanted to close in, so the tarps worked like curtains. In his words: "We use this for outdoor entertaining and they really cut the wind down to a light breeze while adding a nice amount of privacy and shade. ... the best part is after 4½ years so far they are still like new!".

Seasonal use

In cooler climates, removing and cleaning the cover before winter can reduce unnecessary weather exposure. Ask for a material review if it will remain under snow load.

Request a Cabana Cover Quote

Every cabana cover is made to order for the frame it will hang on. Request a Cabana Cover Quote by entering the dimensions of the panels you need and your desired material.